Ezee quando User Manual download pdf (Page 21)

Troubleshooting

No. of

blinks

Explanation Solution

No response on motor lost connection on 5V wire to motor , check

connectors at front fork

2 Brake lever cut off in

contact

check brake lever spring, brake levers should

return to position (applicable with electric cut-off

levers)

3 Brake lever cut off in

contact

check wiring connection, inspect for damage to

the battery level gauge

4 Throttle not in position check if throttle spring is faulty

5 Throttle failure Ground + signal wire to throttle shorted

5V+ signal wire to throttle shorted

Moisture penetration / leave it to dry

Check throttle connections and cable, or replace

6 low voltage Activated when voltage drops below 30.5 V .This

continue to blink and will stop when voltage

recovers to 34V, Or when the main switch is pow-

ered off. Battery charging

7 excessively high voltage Battery voltage is above 44 V./ do not use battery

that is not supplied by eZee, contact your eZee

dealer

8 Hall sensor in motor

faulty

One or more hall sensor disconnected or faulty.

Check connector at the front fork. If connector

is OK, contact your eZee dealer

9 Supply 3 phase wire Check phase wires at the front fork. Contact your

eZee dealer

10 Controller overheating Motor continue to function but the amps directed

will be lessened to reduce the load and cool

controller

1 2 ... 16 17 18 19 20 21 22 23 24

No comments

Ezee quando User Manual Page 21