Quando
Assembly
then tighten the brake mounting bolts. Fine tune with a philips head
screwdriver. Squeeze brakes to test its responsiveness.
If you have little experience with bicycle maintenance. We
recommend you get this done with your local bike shop.
Accessories Install any optional accessories you have
purchased with your bike. Read the manufacturer’s manual
provided.
Battery Insert key into keyhole located by the control-
ler box and turn key counter clockwise while pressing it in, so that
it arrives in the open position. Release the catch located at the un-
derside of the saddle to ip it over. Locate the battery anges in their
slots in the battery holder; then push the battery rmly into the holder
until the connecting pins are rmly in the battery sockets.
The t can be tight when new, so it may be required to apply gentle
pressure. Once the battery is in position, lock into place by turning
the key one click clockwise to the “OFF” position. Ensure that the
key is in “OFF” position until you are ready to ride.
Do not use excessive force to t the battery, which could
result in damaging the connection sockets or pins.
If there is an A/C outlet near to where your bicycle is parked. It may
not be necessary to remove the battery from the bicycle to charge.
Tyres Ensure that the tyres are inated to the correct
pressure of 60 psi. Well inated tyres enhances the comfort, safety
and efciency of your ride.
<
6
10
Comments to this Manuals